Interactive Epson Projectors
The majority of classrooms in the school are equipped with interactive Epson projectors, allowing staff to present wirelessly from their laptop or device.
Before You Start
To connect wirelessly to a projector, you must:
- Be connected to the Staff Wi-Fi network.
- Have the Epson iProjection software installed on your device.
- Obtain the Staff Wi-Fi password from the IT Team if required.
Download Epson iProjection:
Wireless Projector Support - Epson
First-Time Setup
When installing and launching Epson iProjection for the first time:
- Install the Epson iProjection software.
- If prompted, allow the application through your device's firewall.
- In some cases, you may need to temporarily disable the firewall during the initial setup process.
- Open Epson iProjection.
- Set Advanced Connection Mode as the default connection method.
- Ensure your device is connected to the Staff Wi-Fi network.
Using Advanced Connection Mode allows Epson iProjection to discover projectors across the school's network.
Connecting to a Projector
- Connect your device to the Staff Wi-Fi network.
- Open Epson iProjection.
- Wait for the software to detect available projectors.
- Select the projector matching your classroom or room number.
- Click Connect.
Important: Each projector is named after the room in which it is installed. Please ensure you select the correct room before connecting.
Once connected, your device screen will be displayed on the classroom projector and interactive display.
Disconnecting When Finished
When you have finished presenting:
- Open Epson iProjection.
- Click Disconnect.
⚠️ Always disconnect from the projector before leaving the room.
If you remain connected, your screen may continue to be displayed on the projector even when you are elsewhere in the building and still connected to the Staff Wi-Fi network. This can inadvertently display emails, documents, Teams chats, or other sensitive information to students.
Troubleshooting & Useful Tips
Projector Image is Displaying Upside Down
This has occurred on a small number of occasions. It may be caused by accidental settings changes or a minor software glitch.
If the projected image is upside down, use the projector remote control and follow these steps:
- Press the Menu button.
- Navigate to Installation.
- Select Projection.
- Choose Front/Upside Down.
The image should immediately return to the correct orientation.
Streaming Netflix, Disney+, Amazon Prime, etc.
When wirelessly projecting streaming content, you may occasionally encounter a black screen while audio continues to play. This is usually caused by the browser's hardware acceleration settings.
To resolve this issue:
- Open the browser settings.
- Find the option "Use hardware acceleration when available".
- Turn this setting off.
- Restart the browser.
- Reconnect to the projector.
Microsoft Edge
Video guide:Disable Hardware Acceleration in Microsoft Edge
Google Chrome
Video guide:Disable Hardware Acceleration in Google Chrome
Once hardware acceleration is disabled, streaming services such as Netflix, Disney+, Amazon Prime Video, and similar platforms can usually be projected wirelessly without the black-screen issue.
(Screenshot of hardware acceleration setting to be inserted below.)
Troubleshooting Checklist
If your projector does not appear in Epson iProjection:
- Confirm you are connected to the Staff Wi-Fi network.
- Verify that Advanced Connection Mode is enabled.
- Check that your firewall is not blocking Epson iProjection.
- Restart Epson iProjection and try again.
- Confirm that you have selected the correct room projector.
- Restart your device if necessary.
Connection Drops After a Few Minutes
Some staff have reported that their device disconnects automatically from the newer interactive Epson projectors after a few minutes of casting.
In most cases, this is caused by the laptop's Power & Battery settings. On some devices, the default settings are configured to put the screen or device into a power-saving state after only 5 minutes, which can interrupt the iProjection connection.
To resolve this issue:
- Open Settings on your laptop.
- Navigate to System → Power & Battery.
- Adjust the screen timeout and sleep settings to match the screenshot below.
- We recommend increasing the settings from 5 minutes to 20 or 30 minutes where appropriate.
- Reconnect to the projector and test the connection.
This should prevent the projector connection from dropping during lessons, presentations, videos, or extended periods of classroom use.
If problems persist, please contact the IT Team for assistance.